Toshiba dk14 manual Program *66-6Overview, 7-26, For Programs *66-5and *66-6

ISDN

Program *66-6 – LDN/Trunk Group to Channel Group Assignments

Program *66-6 – LDN/Trunk Group to Channel Group Assignments

Processor Type: DK40i, All RCTUs (Release 4.0 or higher)

Program Type: Trunk, PRI and BRI

Initialized Default: Blank

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿ ￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SEL = 6

Enter the Channel Group Number: 0 = BRI; 1~8 = PRI

GRP = Select ISDN trunk ports for each LDN index.

Press 3DJHor 6FUROOfor the next CO line ports.

Enter the LDN Index (1~48)

Channe l Group

Index

CO Line Ports

Channe l Group

Index

CO Line Ports

Channe l Group

Index

CO Line Ports

Program *66-6 Overview

This program assigns Listed Directory Numbers (LDNs) trunk groups to the member’s channel group.

Note The number of direct appearing CO lines cannot exceed the number of CO ports allocated in Program 03. One PRI card, Type 79, assigns 24 B-channels; thus allowing 24 direct appearances.

For Programs *66-5 and *66-6:

Multiple calls can be received with the same LDN. The LDN and Channel Group information in

*66-5 and *66-6 must match. Calls are assigned the next available non-busy port as follows:

♦For PRI: Choose the highest available port to the lowest.

♦For BRI: Choose the lowest available the highest.

♦Multiple LDNs can be assigned to the same CO appearances.

7-26 Strata DK Programming 5/99