Toshiba dk14 Program 71-0Overview, Program 71-1~71-3Overview, 3-149, DNIS Number, Dnis, 1, 71-2

System & Station

Program 71 – DNIS

	DNIS Number		DNIS Number			DNIS Number	DNIS Number Name
DNIS		Routing Points (71-
	(1~5 digits)					VM ID Code (1~16 digits)	(1~16 characters)
Address			1, 71-2, 71-3)
	71-0					71-4	71-5
		1		2	3

Program 71-0 Overview

Defines the DID / Tie / DNIS / ANI line extension numbers that the system should be able to receive. Each extension number can be from two to five digits; normally the local telephone company and/or the DNIS long distance carrier company will provide a list of these numbers.

Each RCTU supports a different quantity of DNIS or DID/Tie line extension numbers (shown above in the Program Sequence).

To assign a DNIS and/or normal Tie/DID line to Program 70-0 assignments: Program 17, LED 05 must be turned ON for the line. In this case, Tie lines do not follow Program 04 assignments and DID lines do not follow Program ￿09 assignments. When this program is used with normal (non- DNIS or non-ANI) Tie and/or DID Lines -Program 17, LEDs 06, 07, and 08 must be OFF.

Program 71-1~71-3 Overview

Assigns the routing destination of each DNIS and/or normal Tie/DID line extension number and/or the routing destination of Automatic Number Identification (ANI) only lines.

Important! Program 71-1 assigns DNIS numbers to route to selected [DN] buttons and makes them flash when the DNIS number is called. When assigning DNIS numbers to route to Directory Numbers ([PDNs], [SDNs], [PhDNs]) using program 71-1, Program *71, *72, and *73 must also be used to assign the telephones, on which the [DNs] appear, to ring. When assigning DNIS numbers to route to ACD and DH groups using Program 71, the telephones (and appropriate [PDN], [SDN], or [PhDN]) in these groups must also be assigned to ring in Program *71, *72, and *73.

System & Station

Strata DK Programming 5/99 3-149