Toshiba dk14 manual Program *44 Overview, 7-13, Isdn, BRI Trunk, Spid, SPID Value, Number, Type

ISDN

Program *44 – BRI Service Profile Identifier (SPID) Parameters

Program *44 – BRI Service Profile Identifier (SPID) Parameters

Processor Type:

DK40i, All RCTUs (Release 4.0 or higher)

Program Type:

Trunk, BRI

Initialized Default: Blank

￿

￿￿

￿

￿￿

￿

￿

￿￿

￿

￿￿￿

6SNU

￿

￿

￿

+ROG

￿

6SNU

￿￿￿￿￿

+ROG

￿

6SNU

￿

￿

+ROG

￿

6SNU

￿

￿

+ROG

SEL = BRI Trunk Number

Enter SPID Value (20 digits max.). Use Button LED 01 to enter a blank.

DATA = SPID Type (0~2)

0- Non-initializing trunk (NIT)

1- one SPID for the interface

2- one SPID for each B-channel

ISDN

BRI Trunk	SPID	SPID Value
Number	Type

Program *44 Overview

BRI interfaces generally require entering an Service Profile Identifier (SPID) intialization value to activate the interface. This program assigns the initialization interface.

When ISDN service is ordered, a SPID is issued from the carrier. A SPID usually includes a 10- digit directory number along with additional digits, which notify the switch as to the type of devices connected to the line and what services/features the switch is to provide.

There are three possible initialization processes, including a non-initializing terminal, one SPID, or two SPID interfaces. These numbers are entered into the system to allow the interface to automatically initialize the link. The type of initialization needed depends on the type of PSTN equipment.

The basic procedure includes configuring a SPID, then the TE performs the initialization / identification process and sends the SPID to the network. Once the SPID is confirmed from the CO, the SPID does not have to be sent to the switch again.

Strata DK Programming 5/99 7-13