Toshiba dk14 manual Program *61 - Analog Trunk Services for ISDN, Program *61 Overview, 7-15, Isdn

ISDN

Program *61 – Analog Trunk Services for ISDN

Program *61 – Analog Trunk Services for ISDN

Processor Type: DK40i, All RCTUs (Release 4.0 or higher)

Program Type: Trunk, PRI and BRI

Initialized Default: see below

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿ ￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SEL = Type of Service (1~3)

1 - Bearer Service

2 - Outgoing Call Pad Level

3 - Incoming Call Pad Level

Enter the trunk number(s) being defined. To add a range, enter XXX￿XXX (low trunk number ￿ high trunk number).

Data	Pad Level (db)
0	0
1	-3
2	-6
3	-9

Enter the Bearer Service:

0 = 3.1 kHz Audio

1 = Speech (default)

DATA = For *61-2 and *61-3, enter Pad

Level (default is 2). See legend below.

ISDN

Data	Pad Level (db)
4	-12
5	-15
6	-18
7	+3

Trunk

Number

Bearer Service	Outgoing Pad	Incoming Pad
*61-1	Level *61-2	Level *61-3

Program *61 Overview

When analog CO lines use ISDN facilities, each analog CO Line needs to be assigned the type of service expected to be used when originating calls. The choices are Speech or 3.1 kHz (used for modem and fax connections). Set the transmission level for outgoing and incoming paths for calls. The default is set for -6 dB.

Strata DK Programming 5/99 7-15