Toshiba dk14 manual Programs 50-31~5 – LCR Special Codes, Programs 50-31~5 Overview

Least Cost Routing

Programs 50-3 (1~5) – LCR Special Codes

Programs 50-3 (1~5) – LCR Special Codes

Processor Type: DK14, DK40i, All RCTUs

Program Type: Least Cost Routing

Initialized Default: 911 in 31, all other codes blank

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿￿+ROG￿6SNU+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SELECT = 31~35 Enter 31~35 to indicate the special code.

DATA = Special Code

Enter the code from the table below. Key 01 = blank

SELECT =	Special Code (4 Digits)	Examples
31		911
32		411
33
34
35

Programs 50-3 (1~5) Overview

This program allows special 1~4 digit codes such as 911 to be routed over the local call route immediately when dialed. If Enhanced 911 (E911) is required, E911 programs should be used instead of this program.

You can enter five special codes in the spaces provided next to 31~35. The codes can be a maximum of four digits, and should include items such as 911 for emergency calls, and 411 or 1+411 for local information, etc.

When any of these codes are dialed, LCR is flagged to treat the call as follows:

♦The call is sent over the local call route plan specified in Program 50-5.

♦No additional digits need to be dialed. They are not necessary. Therefore, the call is put through immediately.

5-6 Strata DK Programming 5/99