Toshiba dk14 Program *31 – Group Pickup Assignments, 6SNU +ROG6SNU+ROG6SNU+ROG6SNU+ROG, 3-86

System & Station

Program *31 – Group Pickup Assignments

Program *31 – Group Pickup Assignments

Processor Type: DK14, DK40i, All RCTUs

Program Type: Station

Initialized Default: All LEDs OFF

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿ ￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

Station Logical Port Number

Enter the station logical port which will be assigned to a pickup group or groups. To add a port range, enter XXX￿XXX (low port ￿ high port).

Light LED Buttons for the port specified in the last step. In the table below, mark an “X” for all LED Buttons which should be lit.

Processor Type	Port Range	Pickup Groups
DK14	000~009	8
DK40i	000~027	16
RCTUA	000~031	20

Processor Type	Port Range	Pickup Groups
RCTUBA/BB	000~079	20
RCTUC/D	000~239	20
RCTUE/F	000~335	20

Pickup Group	LED	Port
Pickup Group 20	20
Pickup Group 19	19
Pickup Group 18	18
Pickup Group 17	17
Pickup Group 16	16
Pickup Group 15	15
Pickup Group 14	14
Pickup Group 13	13
Pickup Group 12	12
Pickup Group 11	11
Pickup Group 10	10
Pickup Group 9	09
Pickup Group 8	08
Pickup Group 7	07
Pickup Group 6	06
Pickup Group 5	05
Pickup Group 4	04
Pickup Group 6	03
Pickup Group 2	02
Pickup Group 1	01

Program *31 Overview

Stations can be divided into as many as 20 pickup groups (see the legend above the record sheet).

Station users can pick up calls (internal or line) that are ringing any station within their group by dialing a single access code (or with a &DOO￿3LFNXS button assigned with Code 480 in Program

39), and pick up calls that are ringing stations in other groups by dialing selected access codes.

Stations can belong to more than one group. (See Program 05 for access codes.) This feature also picks up ringing transfer and hold recall calls, but does not pick up held calls or selectively by directory number.

To pickup held or ringing [PDN] and/or [PhDN] calls selectively, use the ￿￿￿￿ + XXX pickup access code (where XXX is the [PDN] or [PhDN]).

3-86 Strata DK Programming 5/99