Toshiba dk14 manual Program *80 Overview, 3-174, 6SNU +ROG6SNU+ROG6SNU+ROG6SNU+ROG

System & Station

Program *80 – Call Forward Station Ring Assignment

Program *80 – Call Forward Station Ring Assignment

Processor Type: All RCTUs with Release 3.2 and above

Program Type: Station

Initialized Default: LED 01, 04, and 07 ON for all lines

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿ ￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SELECT = CO Line Number

To specify a CO line range, enter XXX￿XXX (low line ￿ high line).

LED buttons = ringing assignment in which calls should Call Forward

Processor	CO Line Range
DK14	NA
DK40i	NA
RCTUA	001~016

Processor	CO Line Range
RCTUBA/BB	001~048
RCTUC/D	001~144
RCTUE/F	001~200

System	Call Forward Station	LED	CO Lines
Ring Mode	Ring Assignment
	Delay 2 (89)	09
Night
	Delay 1 (88)	08
	Immediate (87)	07
	Delay 2 (86)	06
Day 2
	Delay 1 (85)	05
	Immediate (84)	04
	Delay 2 (83)	03
Day
	Delay 1 (82)	02
	Immediate (81)	01

Program *80 Overview

Sets the Call Forward (CF) ringing assignment for ground/loop CO line calls. The station that controls CF should be the only station programmed to ring in the appropriate Ringing Assignment Programs (81~89). This program does not apply to Tie, DID, DNIS, or ANI lines.

Example application: A CO line call rings a CO line button on multiple stations, then Call Forwards. CO line 001 is programmed to ring station 200, then after 12 secs., it delay rings stations 201 and 202 (12 secs.). Then, CO line 001 will CF per station 203’s CF setting. If station 203 has CF-No Answer, CO line 001 will ring station 203, and then CF. If station 203 has CF-All Calls, CO line 001 will not ring station 203, but will forward immediately.

Programming for the above example:

Program 39 - Put CO line 001 button on stations 200~203.

Program 81 - Set CO line 001 to ring station 200 immediately.

Program 82 - Set CO line 001 to Delay Ring station 201 and 202

Program 83 - Set CO line 001 to Delay 2 Ring station 203.

Program *80 - Set CO line 001 to CF during Delay 2 Ring assignment (LED 03 ON).

Set station 203 to CF to Voice Mail. When CO line 001 rings, the call will forward per station 203’s CF (All Calls, No Answer, etc.) setting during the Delay 2 ring period. Note that only station 203 can be set to ring in the Delay 2 (Program 83) ring assignment to allow CF to operate. VM will receive station 203’s VMID (set via code #656).

3-174 Strata DK Programming 5/99