Toshiba dk14 manual 5-18, Route Definition Number, CO Line Group assigned in Program, HMIS Example

Least Cost Routing

Program 54 – LCR Route Definition Tables

Route Definition Number

Route definitions define the CO line group and modified digit tables used for each LCR Plan. See the legend for the number of route definition numbers for your processor.

CO Line Group (assigned in Program 16)

Each line group represents a type of service, e.g., special common carrier, foreign exchange, local line group, etc. Program 40 denies incoming and outgoing line access to stations, including LCR access. Program 41 allows line access to stations using LCR only for outgoing calls when enabled.

Modified Digits Table

Refer to Programs 55-0, 55-1 and 55-2. The system handles line groups differently, according to which modified digits table was assigned in Program 54.

HMIS Example

The following table gives you an example of how you might set up Program 54 for the HMIS:

LCR	Route	Program 16	Program 55	LCR	Route	Program 16	Program 55
	Definition #	CO Line			Definition #	CO Line
Plan			Modified Digits	Plan			Modified Digits
	(see legend	Group (see			(see legend	Group (see
01~16			(see legend above)	01~16			(see legend above)
	above)	legend above)			above)	legend above)
01	1	01	01		Local
02	1	01	01		911
08	1	01	01		Long Distance

5-18 Strata DK Programming 5/99