RMCU

Glossary

RMCU ~ RGLU

Term

Definition

RMCU

RCCB

RCIU2/RCIS

RCOS

RCOU

RCTU

RDDU

RDSU

RDTU

REMU

RFIF

RGLU

Enhanced 911 (E911) CAMA Trunk Direct Interface—Enables connection from the DK424 (Release 4.0 and above) to E911 locator services without third-party equipment. The RMCU supports two subassemblies (RCMS) that provide a total of up to four ports.

Conduit Connection Box—Device required for floor-mounted systems with three or more cabinets to connect AC power and reserve power battery cabling to the system. Cabling from the AC power source and from the reserve power battery source can only be installed by a licensed electrician.

Four-circuit plug-in PCB/four-circuit piggy-back PCB, each of which receives and decodes FSK Caller ID (CLID or CND) information from the Central Office ground or loops Caller ID lines. Each RCIU/RCIS circuit works in conjunction with a DK424 RGLU/RCOU/RCOS line PCB circuit.

Loop Start CO Line Interface Subassembly—Optional subassembly that attaches to the RCOU PCB to provide four additional CO analog line circuits to the PCB. Supports Caller ID when used with RCIU/RCIS circuits.

CO Line Interface Unit—An optional PCB that provides the system with four loop start CO lines. An optional RCOS subassembly can be attached to the RCOU for four more loop start analog CO lines. Supports Caller ID when used with RCIU/ RCIS circuits.

Common Control Unit—The system’s controller PCB that contains the system's main microprocessor and microprocessor bus, ROM, RAM, time switch logic, busy tone detectors, system tones and MOH/BGM Interface. RCTUs include: RCTUA, RCTUB, RCTUBA/BB, RCTUC/D, and RCTUE/F. Each RCTU supports different station and line capacities. The RCTU PCBs also provide interface for the optional RRCS PCB and RKYS key.

Direct Inward Dialing Interface Unit—Optional PCB that provides four analog Direct Inward Dialing line circuits. Supports ANI and DNIS.

Digital/Standard Telephone Interface Unit—Optional PCB that provides two standard telephone and four digital telephone circuits in its basic configuration. An RSTS can be attached to the RDSU for two additional standard telephone circuits.

T1/DS-1 Interface Unit—Optional PCB that provides up to 24-digital channels that can individually be assigned for loop start CO line, ground start CO line, E & M tie line, or DID line operation. Supports ANI and DNIS.

E & M Tie Line Unit—An optional PCB that provides the system with support for four E & M Type I or Type II, Immediate or Wink Start tie lines. Supports ANI and DNIS.

Floor Mount Installation Kit—Kit that is used to floor mount systems.

Analog Ground/Loop Start CO Line Interface Unit—Provides four CO line circuits that can be individually configured for loop start or ground start CO line operation. Supports Caller ID when used with RCIU/RCIS circuits.

Glossary

Strata DK Programming 5/99

GL-9

Page 406 Page 408
Page 407
Image 407
Toshiba dk14 manual GL-9, RMCU RCCB RCIU2/RCIS RCOS RCOU RCTU RDDU RDSU, Rdtu Remu Rfif Rglu
Page 406 Page 408

dk14 specifications

The Toshiba DK14 and DK40I are advanced digital video recorders (DVRs) that have redefined the standard for high-quality video surveillance systems. Designed primarily for security applications, both models boast a suite of impressive features, making them ideal choices for various environments, including commercial, retail, and educational settings.

The Toshiba DK14 stands out with its exceptional recording capabilities. It supports high-definition video capture, ensuring that every detail is captured with crystal clarity. The device can handle multiple camera inputs, allowing users to connect several surveillance cameras simultaneously, depending on the configuration. With its robust storage capacity, the DK14 can accommodate extended recording times, making it suitable for long-term surveillance needs.

One of the key characteristics of the DK14 is its user-friendly interface, which simplifies operation for both novice and experienced users. The system comes equipped with advanced motion detection technology, enabling it to trigger recording only when movement is detected, significantly optimizing storage use. Moreover, it features remote access capabilities, allowing users to monitor live feeds and review recorded footage from virtually anywhere via smartphone or computer.

In comparison, the Toshiba DK40I offers enhanced features targeted towards users requiring higher processing power and larger storage capabilities. This model is equipped with advanced compression technologies such as H.264, which reduces file sizes without compromising video quality. It can support higher-resolution cameras, further enhancing the clarity and detail of recorded footage.

The DK40I also prides itself on its scalability, accommodating numerous input channels, making it suitable for expansive surveillance setups. Another significant feature is its sophisticated alarm management system, which can integrate with various security sensors and alarms, providing users seamless control over their security environment. The device also supports various video outputs, including HDMI and VGA, ensuring compatibility with a wide range of display systems.

Both models utilize Toshiba's commitment to reliability and performance, incorporating high-grade components designed to withstand the rigors of continuous operation. They are engineered for ease of maintenance, with options for firmware updates and technical support, ensuring that users benefit from the latest advancements in surveillance technology.

Overall, Toshiba’s DK14 and DK40I represent cutting-edge solutions in the realm of digital video recording, offering exceptional performance, versatility, and user-friendly features to cater to diverse surveillance needs.
Top Page Image Contents