Toshiba dk14 3-78, System & Station, Program 30 – Station Class of Service, +Rog, 6SNU6SHDNHU

System & Station

Program 30 – Station Class of Service

	Action (press buttons + LED buttons)	LCD Response
6.	LED buttons 01~20
	LED buttons 01~20 activate features for each station port or port
	range. Make the following selections by turning the appropriate button
	LED ON or OFF for each item (01~20) for each port, as marked on the
	system record sheet:
	LED 01: Speakerphone Enabled
	LED 02: Microphone Key Lock Enabled
	LED 03: Microphone ON at Start of Call
	LED 04: Not Used
	LED 05: Speed Dial Allowed
	LED 06: Automatic Busy Redial Access Enabled
	LED 07: Automatic Off-hook Call Announce
	LED 08: Forced Account Code Enabled
	LED 09: Toll Restriction Override Code Revision Authority
	LED 10: DISA Security Code Change Allowed
	LED 11: Dial Pulse (DTMF Off) for Standard Telephone
	LED 14: Account Codes Verified
	LED 15: Verified Account Code Revision Authority
	LED 16: Traveling Class of Service Code Revision Authority
	LED 17: Do Not Disturb Override Allowed
	LED 18: Executive Override Allowed
	LED 19: Privacy Override Allowed
	LED 20: Not Used
	If programming a port range, the LED indications are as follows:
	♦ LED-ON, all ports in range are enabled for that item.
	♦ LED-OFF, all ports in range are disabled for that item.
	♦ LED-FLASHING, some ports in range are enabled and some
	ports are disabled.
7.	+ROG	30 Select
	Secure data in system programming.	Data Programmed
8.	6SNU￿￿6SHDNHU￿	30 Select =
	Prepare system for another selection (go back to Step 5), or exit
	Program 30 (continue with Step 9).
9.	￿￿￿+ROG	30 Select = ##
	Secure Program 30 data in system memory.	Data Programmed
10.	6SNU￿￿6SHDNHU￿	Program =
	Exit Program 30. Enter another program number or exit programming
	mode (go to Step 11). Speaker beeps to indicate it is exiting Program
	33.
11.	## Hold		No. N-N
	Exit programming mode.	Jan 20 Sun	06:58

1. N-N = Programming telephone [PDN]

3-78 Strata DK Programming 5/99