Toshiba dk14 manual Program 37 – Ring Transfer Camp-onRecall Time, Program 37 Overview, 3-103

System & Station

Program 37 – Ring Transfer (Camp-on) Recall Time

Program 37 – Ring Transfer (Camp-on) Recall Time

Processor Type: DK14, DK40i, All RCTUs

Program Type: Station

Initialized Default: Assigns Ring Transfer Recall Time of 32 seconds to all ports

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SELECT = Station Logical Port Number

HOLD TIME = Port Number

	Enter the port number that needs a Ring Transfer Recall							Enter the Ring Transfer Recall Time (three
	Time assigned.							digits, in seconds)
	To add a port range, enter XXX￿XXX (low port ￿ high port).							Enter 011~999 for 11 to 999 seconds.
		Processor			Port Range	Processor			Port Range
			DK14		000~009	RCTUBA/BB			000~079
			DK40i		000~027		RCTUC/D		000~239
		RCTUA			000~031		RCTUE/F		000~335
Port	Hold Time			Port	Hold Time	Port		Hold Time		Port	Hold Time

System & Station

Program 37 Overview

If a busy or ringing station does not answer a call sent to it via ring (blind) call transfer (lines or [DNs]), the station originating the ring (blind) transfer is recalled after an amount of time determined with this program. This time (011~999 seconds) is set independently for each originating station port. Initialized data sets all stations for a 032-second recall time. Ring Transfer must first be enabled for the system with Program 10-1, LED 07 ON.

Strata DK Programming 5/99 3-103