Toshiba dk14 manual Program 55-1and 2 Overview, 5-22

Least Cost Routing

Program 55-1 and 2 – Add Digits Before and/or After the Dialed Number

Program 55-1 and 2 Overview

Enter the digits that must be added to the front of the number dialed in the Add Digits Table. The maximum digits is 22, including pauses.

♦Length of pause can be indicated by using codes (P1~P8) specified in the Pause Entry Reference Table. Each pause takes two digits of memory space.

♦Try to allow for the longest wait, e.g., make the pause longer, rather than shorter, to accommodate the length of time a carrier may need to access the service tones, etc.

♦If using special codes in Program *45-3, use Program *45-4 to indicate if the Program *45-3 codes should be sent before or after the Program 55-1 and 55-0 Modified Digits Table (MDT) digits. Program *45-4 also allows a pause to be inserted into the dialing sequence.

5-22 Strata DK Programming 5/99