Code 4: Automatic Release (AR) Time

System & Station

Program 15 – Ground/Loop/Tie/DID Line Options

Two-CO line DISA calls always release when AR/CPC is sent. DISA release via AR/CPC is not related to this program. CO line calls disconnected by the AR/CPC signal will be represented on the Station Message Detail Recording (SMDR) report by a “ *” next to the CO line number. Code 3 does not apply to ground start lines, which automatically disconnect when the external party hangs up. See Important! note in earlier paragraph on Code 0.

DK424 only: If loop start lines are programmed to detect the AR/CPC-Hold signal, they do not remain on the attendant console loop keys when the attendant console sets up trunk-to-trunk connection. If programmed to ignore AR/CPC-Hold, they remain on the attendant console Hold loop keys.

Important! Enable AR/CPC-Hold detect on loop start lines only after testing that the CO sends the AR/CPC-Hold signal.

Code 4: Automatic Release (AR) Time

AR/CPC signaling timing is different depending on the Central Office equipment. An assignment choice exists between Crossbar or ESS Central Offices.

For more information on AR/CPC, see the preceding Code 0 and Code 3 sections.

Code 5: Tandem Line Connection

Once a Two-line Conference call is made by an electronic, digital or (in R3.2) standard telephone users or voice mail ports, the user or voice mail device may drop out of the conference and leave the two lines connected. The choice exists for each line that may have this capability. This option must be enabled to allow CO lines (ground/loop/Tie/DID) to be used for outgoing DISA, Call Forward External, and Tie/DID/DNIS External Network routing calls.

With Release 3.2, a station which set up a tandem call and then dropped out can dial the pickup code (￿￿￿￿￿) to retrieve the tandem call. If more than one tandem connection is set up by a station, ￿￿￿￿￿ picks up the call with the lowest CO line as a priority.

Prior to Release 3.2, standard telephones could set up tandem calls, but they could not drop out. If they tried to drop out, the call would ring back to the standard phone.

Code 7: Forced Account Code (Verified or Non-verified)

If the Forced Account Code feature is used, (see Program 30) a station user is required to enter an Account Code before a CO line call can be completed. A choice exists for each line.

Code 8: Operation After CO Line Flash

If a standard telephone user is on an existing CO line call and flashes the hookswitch on their telephone, a Dual-tone Multi-frequency (DTMF) receiver channel may or may not be connected, depending on this assignment. If the CO line is a rotary dial only type, the QRCU2, K4RCU3, K5RCU, K5RCU2, or RRCS must be seized after flash when dialing from DTMF standard telephones. The QRCU2, K5RCU, K5RCU2, K4RCU3 or RRCS will decode the dialed tones and send dial pulses to the line.

3-46

Strata DK Programming 5/99

Page 92
Image 92
Toshiba dk14 manual 3-46, Code 4: Automatic Release AR Time, Code 5: Tandem Line Connection

dk14 specifications

The Toshiba DK14 and DK40I are advanced digital video recorders (DVRs) that have redefined the standard for high-quality video surveillance systems. Designed primarily for security applications, both models boast a suite of impressive features, making them ideal choices for various environments, including commercial, retail, and educational settings.

The Toshiba DK14 stands out with its exceptional recording capabilities. It supports high-definition video capture, ensuring that every detail is captured with crystal clarity. The device can handle multiple camera inputs, allowing users to connect several surveillance cameras simultaneously, depending on the configuration. With its robust storage capacity, the DK14 can accommodate extended recording times, making it suitable for long-term surveillance needs.

One of the key characteristics of the DK14 is its user-friendly interface, which simplifies operation for both novice and experienced users. The system comes equipped with advanced motion detection technology, enabling it to trigger recording only when movement is detected, significantly optimizing storage use. Moreover, it features remote access capabilities, allowing users to monitor live feeds and review recorded footage from virtually anywhere via smartphone or computer.

In comparison, the Toshiba DK40I offers enhanced features targeted towards users requiring higher processing power and larger storage capabilities. This model is equipped with advanced compression technologies such as H.264, which reduces file sizes without compromising video quality. It can support higher-resolution cameras, further enhancing the clarity and detail of recorded footage.

The DK40I also prides itself on its scalability, accommodating numerous input channels, making it suitable for expansive surveillance setups. Another significant feature is its sophisticated alarm management system, which can integrate with various security sensors and alarms, providing users seamless control over their security environment. The device also supports various video outputs, including HDMI and VGA, ensuring compatibility with a wide range of display systems.

Both models utilize Toshiba's commitment to reliability and performance, incorporating high-grade components designed to withstand the rigors of continuous operation. They are engineered for ease of maintenance, with options for firmware updates and technical support, ensuring that users benefit from the latest advancements in surveillance technology.

Overall, Toshiba’s DK14 and DK40I represent cutting-edge solutions in the realm of digital video recording, offering exceptional performance, versatility, and user-friendly features to cater to diverse surveillance needs.