Toshiba dk14 manual Program *11-6- E911 Interdigital Timer, Program *11-6Overview

E911

Program *11-6 – E911 Interdigital Timer

Program *11-6 – E911 Interdigital Timer

Processor Type:	All RCTUs (Release 4.0)
Program Type:	System
Initialized Default:	Data, 2 seconds

￿

￿￿

￿

￿￿

￿

￿

￿￿

￿

￿￿￿

6SNU

￿

￿￿

+ROG

￿

6SNU

￿

+ROG

￿

6SNU

￿

￿

+ROG

￿

6SNU

￿

￿

+ROG

SELECT = 6

DATA = interdigital time delay before routing calls after

9XX (01~15 seconds).

If X=1, timer resets

If X=0, 2~9, digits are routed/sent normally

DATA (01~15 secs.)

Program *11-6 Overview

This program assigns the amount of time allotted for the E911 interdigital timer. When the E911 feature is enabled, the DK applies the E911 interdigital timer any time a user dials “9” as the first digit. This applies to any type of call originated from a [DN] when you dial 9XX or 9 + 9XX. After 9 is dialed as the first digit, the DK will wait the number of seconds set in this program before processing the dialed digit.

If “91” or “99” is dialed as the first and second digit, the system will wait the number of seconds set in this program before processing the dialed digits. If 91X is dialed, the system will route the call out the CAMA trunk if X=1 or it will process the call as a normal call if X=0 or 2-9.

E911

Strata DK Programming 5/99 8-9