Toshiba dk14 Program 31 – Station Class of Service, Program 31 Overview, 3-80, System & Station

System & Station

Program 31 – Station Class of Service

Program 31 – Station Class of Service

Processor Type: DK14, DK40i, All RCTUs

Program Type: Station

Initialized Default: LED 10 ON for Ports 000~119; LED 11~13 ON for all ports.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SELECT = Station Logical Port Number(s)

Enter the port numbers to which class of service must be assigned.

Processor Type	Port Range
DK14	000~009
DK40i	000~027
RCTUA	000~031

Light LED Buttons for the port specified in the last step. All LED Buttons marked with an “X” in the table below should be lit.

Processor Type	Port Range
RCTUBA/BB	000~079
RCTUC/D	000~239
RCTUE/F	000~335

Feature	LED	Port
Toshiba Stratagy/VP (B + Station No.)	20
Toshiba Stratagy/VP (B No Station)	19
Executive & Privacy Override Blocking	18
End/End Signal Rcv (VM)	17
Receive VM ID Code	16
Toshiba Stratagy/VP Integration (A/D)	15
Handset OCA	14
Handset OCA Warning Tone	13
Pooled Line Key - No Flash if No Ring	12
Busy Override Tone - Continuous	11
All Call Page Allowed - EKTs/DKTs	10
VM (No Conference)	09
VM Group 4 (does not apply to DK14)	08
VM Group 3 (does not apply to DK14)	07
VM Group 2	06
VM Group 1	05
VM to VM Call Blocking Called/Calling	04
OCA Enabled (To Receive)	03
Handsfree No Warning Tone	02
Handsfree Disabled	01

Program 31 Overview

Program 31 sets most voice mail or External Auto Attendant port assignments. Each standard telephone port (QSTU2, RSTU2, RSTU, PSTU, PESU, RDSU, KSTU2, QSTU2) connected to a Toshiba Stratagy, Stratagy DK or VP voice mail system should have LEDs 04, 15, 16, 17, 18, 19, and 20, and one of the following: 05, 06, 07, or 08 turned ON. These LED’s should be ON for VM ports only, not for telephone ports.

3-80 Strata DK Programming 5/99