Toshiba dk14 manual 3-138, See Program *15 for Tenant Group assignments

System & Station

Program 59 – Attendant Console Flexible Button Codes

Table 3-6	Additional Feature Button Codes (continued)
Button Function		Button Labels	Code	Notes
Call Pickup (Group)4		Group Pickup	480	Picks up a call to any group to which
				station is assigned in *31.
Do Not Disturb		Do Not Disturb or DND	498	Prevents calls to station.
				Separates the called party’s ISDN sub-
ISDN Sub-address		Sub-address	467	address from the called party number.
				The ￿digit performs this function on
				standard telephones.
				Initiates DK to send dialed digits to the
				ISDN network when this button is
				pressed from a digital or electronic
ISDN Start		Start	469	telephone. Program *63-2 invokes the
				same function when the Dial Timer
				expires. Also see Tone Button in this
				table.
LCD Message Select		LCD Msg Select or LCD M	481	Begins LCD message selection.
Night Transfer Lock		Night Lock1 or NT1 L1~Night		Used to lock system ringing mode: DAY,
Tenant 1~Night Transfer			431~434	DAY2, NIGHT See Programs 74 and *36
		Lock4 or NT4 L4
Lock Tenant 4				for NT Lock Password assignments.
				Simulates On-hook/Off-hook operation
Release and Answer		Release and Ans and RLS/ANS	466	to release an existing call and answer
				new incoming/ringing call.
Save Last Dialed Number		Save Last Number or SAVE	485	Saves last number dialed for future
				speed dial.
				Reserves button for station speed dial
				for the following processors:
Station Speed Dial Codes		SD	*10~*49	RCTUBA/BB
			*10~*49	RCTUC/D
			*100~*139	RCTUE/F
				Speed dial number is set by station port
				000.
System Speed Dial Codes		SD	*600~*699	RCTUBA/BB
			*600~*699	RCTUC/D
			*200~*999	RCTUE/F
				CO dial signals set to tone or pulse.
Tone		Tone Dial Select or TONE	490	For ISDN applications, after the user
				presses the Tone Dial Select button, any
				digits dialed after it is will be sent using
				DTMF tones.

Notes

●

●

See Program *15 for Tenant Group assignments.

Picks up calls to telephones in any call pickup group to which the telephone is assigned in Program *31.

●

●

Attendant consoles cannot be equipped with [SDNs] or [PhDNs]. The console [DN] is assigned to the console port number in Program 04. The console’s [DN] can have only one appearance.

Attendant consoles cannot be equipped with [PDNs], [SDNs], or [PhDNs]. The [In-DN] button is the console’s [DN], assigned in Program 04; it supports incoming calls only and can only appear once on a console.

3-138 Strata DK Programming 5/99