Toshiba dk14 manual Program 92 Example, 2-10, 3. 6SNU6SHDNHU+ROG, 4. 6SNU6SHDNHU, 6. +ROG

Initialization & Test

Program 92 – Initializing Misc. Backup RAM

●

●

Program 92-9 does not affect Call Forward External or Fixed Call Forward settings.

You must power the system OFF then back ON to clear telephone LCD Call Forward Displays and Call Forward button LEDs. Call Forward memory is cleared when you run Program 92-9, even if system power is not cycled.

Program 92 Example

Action (press buttons + LED Buttons)	LCD Response
1. Use the programming LCD electronic or digital telephone. (See “Step		No. N-N1
1: Check Minimum Hardware Requirements” on Page 1-14.)	Jan 20 Sun	06:43
2. ￿￿￿￿￿￿￿￿￿	Program Mode
Enter programming mode. (Do not press [DN] button.) System beeps
after 6SNU￿￿6SHDNHU￿ is pressed to indicate program number may
be entered.
3. 6SNU￿￿6SHDNHU￿￿￿￿￿+ROG	Program = 92
Access Program 92.		Data Store
4. 6SNU￿￿6SHDNHU￿	92 Select =
Prepare the system for selection of programs to initialize. For new
system installation perform all 1~4.
5. Select one of the following.	92 Select = 1
￿ + LED Buttons 01 & 03	Each Dial Clr
Clears Station Speed Dial, Voice Mail ID codes, and LCD memos
assigned to station speed dial numbers.
or...	92 Select = 2
￿￿+ LED Buttons 01 & 04	Common Dial Clr
Clears System Speed Dial and LCD memos assigned to system
speed dial numbers.
or...	92 Select = 3
￿ + LED Buttons 02 & 03	Msg Clr
Clears Character Message Memory (station and system) and user
name display.
or...	92 Select = 4
￿ + LED Buttons 02 & 04	Tmr Reminder Clr
Clears timed reminders.
or...	92 Select = 5
￿ + LED Buttons 01 & 05	DKT VR Initial
Presets the Ring, Speaker, Mute Ring, and Intercom Tone, BGM,
volume levels of all digital telephones to approximately mid-range.
or...	92 Select = 9
￿ + LED Buttons 03 & 04	Back Up RAM Clr
Clears Call Forward and Message Waiting (R3) Memory except Fixed
Call Forward Memory.
6. +ROG	92 Select = (1~0)
LEDs lit in Step 5 turn off to secure data in system programming.	Data Programmed
Repeat Steps 4~6 until Step is completed.

1. N-N is the Program Telephone [DN].

2-10 Strata DK Programming 5/99