Toshiba dk14 manual Program 16 Overview, 3-49

System & Station

Program 16 – Assign CO Line Groups (or Dial 9)

Program 16 Overview

Use Program 16 to assign each CO line to a CO line group or a general “dial 9” group. A general group for outside calling is available with a “dial 9” access code as the initialized state for all lines.

Lines can be accessed with a dialing code instead of with a CO /LQH button. This is useful for WATS lines or other facilities, and is heavily used in Least Cost Routing and Pooled Line Button assignments.

Do not attempt to assign a line to more than one group. A line need not be assigned to a group. If lines are not used, they should be taken out of all groups, including the “dial 9” group. Automatic Busy Redial (ABR) will not function if unconnected (unused) lines are assigned to a line group.

After programming, press:

♦9RO▲ to turn all LEDs ON

♦9RO▼ to turn all LEDs OFF

♦0RGH and CO line number, then ￿ to display and advance

System & Station

Strata DK Programming 5/99 3-49