4.6 Wireless Station Configuration
This section applies to all Wireless stations wishing to use the Wireless Broadband Router's Access Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the Wireless Broadband Router, each Wireless Station must have compatible settings, as follows:
Mode | The mode must be set to Infrastructure (rather than |
| |
| Access points only operate in Infrastructure mode. |
|
|
SSID | This must match the value used on the Wireless |
(ESSID) | Broadband Router. The default value is Wireless. |
| Note! The SSID is case sensitive. |
|
|
Wireless | By default, Wireless security on the Wireless |
Security | Broadband Router is disabled. |
| • If Wireless security remains disabled on the |
| Wireless Broadband Router, all stations must |
| have wireless security disabled. |
| • If Wireless security is enabled on the Wireless |
| Router (either WEP or |
| each station must use the same settings as the |
| Wireless ADLS Router. |
|
|
49