3Com WBR-6000 PPPoE Link, Status, Connection Log, Disconnect, Clear Log, Refresh, IP Address

	local LAN.)
IP Address	The IP Address of this device, as seen by
	Internet users. This address is allocated by your
	ISP (Internet Service Provider).
Network Mask	The Network Mask associated with the IP
	Address above.
PPPoE Link	This indicates whether or not the connection is
Status	currently established.
	• If the connection does not exist, the
	"Connect" button can be used to establish a
	connection.
	• If the connection currently exists, the
	"Disconnect" button can be used to break
	the connection.
Connection Log
Connection Log	• The Connection Log shows status
	messages relating to the existing
	connection.
	• The most common messages are listed in
	the table below.
	• The "Clear Log" button will restart the Log,
	while the Refresh button will update the
	messages shown on screen.
Buttons
Connect	If not connected, establish a connection to your
	ISP.
Disconnect	If connected to your ISP, hang up the
	connection.
Clear Log	Delete all data currently in the Log. This will
	make it easier to read new messages.
Refresh	Update the data on screen.

69