EVGA 730a manual Hardware Installation

Hardware Installation

‰System Memory support

Supports dual channel JEDEC DDR-800. Supports up to 8 GBs DDR2 memories.

‰Twelve USB 2.0 Ports

¾Supports hot plug

¾Twelve USB 2.0 ports (four rear panel ports, eight onboard headers)

¾Supports wake-up from S1 and S3 mode

¾Supports USB 2.0 protocol up to 480 Mbps transmission rate

‰Onboard Serial ATA II

¾300MBps data transfer rate

¾Six Serial ATA II connectors

¾NVIDIA MediaShield RAID with support for RAID 0, RAID 1, RAID 0+1, RAID 5, and JBOD

¾Supports hot plug and NCQ (Native Command Queuing )

‰Onboard LAN

¾LAN interface built-in onboard

¾Supports 10/100/1000 Mbit/sec Ethernet

‰Onboard Audio

¾Azalia High-Definition audio

¾Supports 8-channel audio

¾Supports S/PDIF output

¾Supports Jack-Sensing function

‰Green Function

¾Supports ACPI (Advanced Configuration and Power Interface)

¾Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4 (Suspend to disk - depends on OS), and S5 (soft - off)

‰Expansion Slots

¾Three PCI slots

¾Two PCI Express x1 slot

¾One PCI Express x16 Graphics slots with PCI Express 2.0

EVGA 11