EVGA manual Evga nForce 730a Motherboard, Sata Signal Cable

Hardware Installation

1 - Floppy Cable

Used to attach a floppy drive to the motherboard.

1 - 2-Port SATA Power Cable

Allows a Molex power connector to adapt to a

SATA power connector.

2 - SATA Signal Cable

Used to support the Serial ATA protocol and each one connects a single drive to the motherboard.

1 - IDE-ATA 133 HDD Cable

Passes data between the IDE connection on the motherboard and IDE device.

1 - Driver Installation CD

Contains drivers and software needed to setup the motherboard.

EVGA nForce 730a

Motherboard

The EVGA nForce 730a motherboard with the NVIDIA GeForce 8200/ nForce 730a chipset is a PCI Express, Hybrid SLI-ready motherboard. Figure 1 shows the motherboard and Figures 2 shows the back panel connectors.

EVGA 13