Exmark 920 manual Specifications, Model Numbers, Systems, Engine, Fuel System, Electrical System

Models: 920 000 & higher

1 60
Download 60 pages 42.39 Kb
Page 17
Image 17
Specifications

Specifications

Specifications

Model Numbers

Serial Nos: 920,000 and Higher

LZD25KD605; LZD25KD725

Systems

Engine

Engine Specifications: See your Engine Owner’s Manual

Engine Oil Type: Exmark 4–Cycle Premium Engine Oil

RPM: Full Speed: 3850 ±50 RPM (PTO not

engaged) Idle: 1400 ±100 RPM

Fuel System

Capacity: 15.5 gal. (58.6 L)

Type of Fuel: Diesel fuel, 40 cetane or higher or biodiesel up to B20 (20% biodiesel, 80% petro diesel).

Fuel Filter: In-line 113 Micron Exmark P/N 112-7836.

Fuel Shut-Off Valve: 1/4 turn increments (“OFF”, right tank, left tank, )

Fuel gauge in left hand fuel tank.

Electrical System

Charging System: External Alternator

Charging Capacity: 60 amps

Battery Type: BCI Group 26

Battery Voltage: 12 Volt

Polarity: Negative Ground

Fuses: One 20 amp blade type; One 30 amp blade type

Safety Interlock System

PTO must be disengaged, brake engaged, and motion control levers out (neutral lock) to start engine. (It is not necessary for the operator to be in the seat to start the engine.)

Operator must be in seat when PTO is engaged, brake is disengaged, or motion control levers are moved in or engine will stop.

Engine will stop if either the left, the right, or both levers are moved from neutral lock position while brake is engaged.

Engine Overheat Protection System

PTO will disengage, an alarm will sound, and the coolant temperature gauge will be in the red area when the engine temperature reaches an overheat condition. The PTO will not re-engage until the engine has cooled and the PTO switch is manually shut-off and re-engaged.

Note: If the engine coolant level is below the indicator line on the overflow bottle when the engine is cold, the coolant temperature gauge may not register correctly during operation and/or the warning buzzer may not sound if the engine overheats. Refer to Check Engine Coolant Level in Maintenance.

Cooling System

Fan: Electric with continuous operation with engine running.

Coolant Liquid: 50/50 mix of DexCool© extended life antifreeze and water.

Coolant Capacity: 4 quarts

Operator Controls

Steering and Motion Control:

Note: Motion control levers are adjustable to two heights.

Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.

Steering is controlled by varying the position of the levers relative to each other.

17

Page 17
Image 17
Exmark 920 manual Specifications, Model Numbers, Systems, Engine, Fuel System, Electrical System, Safety Interlock System