Operation
Product Overview
Figure 4
1. | Motion control levers | 5. | Engine Controls (right |
2. | Parking brake |
| console) |
6. | Seat belt | ||
3. | Height of cut adjustment | 7. | Rollover Protection |
|
|
| System (ROPS) |
4.Fuel cap (both sides)
Operation
Note: Determine the left and right sides of the machine from the normal operating position.
Controls
Motion Control Levers
The motion control levers located on each side of the console control the forward and reverse motion of the machine.
Moving the levers forward or backward turns the wheel on the same side forward or reverse respectively. Wheel speed is proportional to the amount the lever is moved.
Moving the levers outward from the center position into the
Figure 5
1. | Neutral lock position | 5. | Neutral (operate) |
| (handles out) |
|
|
2. | Neutral operate position | 6. | Reverse |
| (handles in) | 7. | Neutral lock |
3. | Front of Unit |
4.Forward
Throttle Control
Located on right fuel tank.
The throttle is used to control engine speed. Moving the throttle lever forward will increase engine speed
20
