Operation
Open the Fuel Shut-Off Valve
Rotate the valve 1/4 turn counterclockwise to turn the fuel on (if equipped).
Starting the Engine
1. Connect the wire to the spark plug.
Figure 10
Honda unit
1.Muffler
2.Oil fill/dipstick
3.Fuel tank cap (fuel tank varies)
4.Recoil starter handle (located on handle bar for zone start units)
5.Engine stop switch (if equipped)
6.Air filter
7.Choke
8.Spark plug
Figure 11
Kawasaki units with large fuel tank shown
1.Muffler
2.Oil fill/dipstick
3.Recoil starter handle
4.Fuel tank cap (fuel tank varies)
5.Engine stop switch (if equipped)
6.Oil filter
7.Air cleaner
8.Primer bulb (if equipped)
9.Spark plug
2.Open the fuel valve.
3.For ECXKA21 and ECXKABBC21 Units: Turn the engine stop switch to “” (see Figure 5). Press the primer bulb two times (see Figure 12).
Figure 12
For ECXHNBBC21 Units: Turn the engine stop switch to “” and pull outward on the choke control.
Note: Do Not use the choke when the engine is warmed up.
4.For units without a Blade Brake Clutch: Hold the blade control bail to the handle.
16
