6.3 BATTERY DISPOSAL

DANGER

POTENTIAL HAZARD

♦Battery electrolyte contains sulfuric acid, which is poisonous and can cause severe burns

WHAT CAN HAPPEN

♦Swallowing electrolyte can be fatal or if it touches skin can cause severe burns.

HOW TO AVOID THE HAZARD

♦Wear safety glasses to shield eyes, and rubber gloves to protect skin and clothing when handling electrolyte.

♦Do not swallow electrolyte.

Federal law states that batteries should not be placed in the garbage. Management and disposal practices must be within relevant federal, state or local laws.

If a battery is being replaced or if the unit containing the battery is no longer operating and is being scrapped, take the battery to a local certified recycling center. If no local recycling is available return the battery to any certified battery reseller.

7.TROUBLE SHOOTING

7.1MOWER PULLS LEFT OR RIGHT (W/LEVERS FULLY FORWARD).

a)It is common for a machine to pull slightly left or right with levers fully forward. Move levers forward and compensate as neccessary

b)Check air pressure in tires; 13 psi/drive, 13 psi/ pneumatic castors.

c)Check reverse indicator and motion control linkage adjustment. See Section 5.2.10 and 5.2.11.

7.2MOWER CUTS UNEVENLY.

a)Check air pressure in tires; 13 psi/drive, 13 psi/ pneumatic casters. A more uniform cutting height may be obtained with higher tire pressure on rough terrain. A lower tire pressure provides more flotation. Higher pressures in front casters may cause them to shimmy on hard surfaces.

b)Check deck support chains.

c)Check deck leveling (See Adjustments Section 5.2.2.)

Note: The front of the mower deck will be approximately 1/4”lower than the back of the mower deck.

d)Check blades tip to tip for straightness (they should be within 3/16" or one blade width from being in line.)

7.3ENGINE WILL NOT START.

a)Be sure the throttle control is midway between the “SLOW” and “FAST” positions, and the choke is in the “ON” position for a cold engine or the “OFF” position for a warm engine.

b)Make sure there is fuel in the fuel tank and that the fuel valve is open.

c)Operator must be in the seat. Be sure the seat switch is properly adjusted. See Section 5.2.5.

d)Make sure the parking brake is set and motion control levers are moved out (neutral lock position).

- 33 -

Page 37 Page 39
Page 38
Image 38
Exmark LAZER ZTM Trouble Shooting, Battery Disposal, Mower Pulls Left or Right W/LEVERS Fully Forward, Mower Cuts Unevenly
Page 37 Page 39

LAZER ZTM specifications

The Exmark Lazer ZTM represents a pinnacle of engineering excellence in the world of commercial zero-turn mowers. Renowned for its exceptional performance and durability, it is a favorite among landscaping professionals who require reliable equipment that can tackle the toughest mowing conditions.

At the heart of the Lazer ZTM is the powerful Kohler and Kawasaki engines that provide a range of horsepower options, ensuring that there is a configuration suitable for various mowing tasks. The efficiency of these engines is complemented by advanced cooling systems and heavy-duty air filtration, which helps to extend their life and optimize performance.

One of the standout features of the Lazer ZTM is its innovative UltraCut mowing deck. Available in various cutting widths, from 48 inches to 72 inches, the UltraCut deck is designed to deliver a premium cut quality across a range of grass types and conditions. Its unique design allows for superior airflow, resulting in better clipping dispersal and a clean cut. The adjustable cutting height provides operators with versatility, enabling them to tailor the height to specific requirements.

The Lazer ZTM is equipped with Exmark's innovative RED Technology, which stands for redesigned engine diagnostics. This smart technology allows operators to monitor the mower's performance in real time, providing crucial data on engine health, RPM, and fuel efficiency. This integration of technology enhances operational efficiency, limits downtime, and extends the lifespan of the mower.

Another hallmark of the Lazer ZTM is its robust construction. The frame is engineered from heavy-duty steel, ensuring longevity and resistance to wear and tear. Its commercial-grade components are designed to withstand the rigors of daily use, making it a reliable choice for professional landscapers.

Comfort and ergonomics also play a significant role in the Lazer ZTM’s design. The operator platform features a cushioned seat with adjustable armrests, providing comfort during extended mowing sessions. The control layout is intuitive, allowing for seamless operation and maneuverability in tight spaces.

Overall, the Exmark Lazer ZTM stands out for its combination of power, cutting efficiency, and operator comfort. Its commitment to innovation and quality makes it a leading choice for those looking to elevate their mowing experience. Whether for commercial landscaping or large property maintenance, the Lazer ZTM promises to deliver outstanding results.
Top Page Image Contents