Exmark Turf Tracer HP manual Assembly Instructions, Dimensions, Torque Requirements

2.10 DECK

2.10.1	Cutting Width:
	Model 36 in	35.25 in. (89.5 cm)
	Model 48 in	47.25 in. (120.0 cm)
	Model 52 in	52.00 in. (132.1 cm)

2.10.2Discharge: Right Side

2.10.3Blade Size:

Model 36 in	18.00 in. (45.7 cm)	Qty. 2
Model 48 in	16.25 in. (41.3 cm)	Qty. 3
Model 52 in	18.00 in. (45.7 cm)	Qty. 3

2.10.4Type of Drive: Manual engagement of belt with over-center lock. Belt tension is adjustable via turnbuckle.

2.10.5Deck Mounting: Full floating deck is attached to out-front support frame, removable for service.

2.10.6Cutting Height: Adjusts in 1/2” (1.3 cm) increments from 1.5” (3.8 cm) to 4 1/2” (11.4 cm).

2.11DIMENSIONS

2.11.1	Overall Width:	36”	48”	52”
	Discharge chute down	46.25”	58.25”	62.6”
		(117.5 cm)	(148.0 cm)	(159.0 cm)
	Discharge chute up	36.1”	48.1”	53.0”
	(Transport only)	(91.7 cm)	(122.2 cm)	(134.62 cm)
2.11.2	Overall Length:	36”	48”	52”
		77.7”	73.7”	75.9”
		(196 cm)	(185 cm)	(191 cm)
2.11.3	Curb Weight:	36”	48”	52”
		565 lbs.	610 lbs.	644 lbs.
		(211 kg)	(277kg)	(292 kg)

∗Weights will vary slightly depending on engine and electric start options.

2.11.4Overall Height: 44.1” (112 cm) (all models)

2.11.5Tread Width (to outside of tires):

36” Model	35.0” (88.9 cm)
48” Model	39.4” (100.1 cm)
52” Model	39.4” (100.1 cm)

2.12 TORQUE REQUIREMENTS

BOLT LOCATION	TORQUE
Blade Mounting Bolt	115-120 ft-lbs. (156-163 N-m)
Cutter Housing Spindle Nut	140-145 ft-lbs. (190-197 N-m)
Anti-Scalp Roller Bolts	40-45 ft-lbs. (54-61 N-m)
Mower Deck Support/Engine Deck Mount	30-35 ft-lbs. (41-47 N-m)
Engine Mounting Bolts	15-20 ft-lbs. (20-27 N-m)
Wheel Lug Nuts	90-95 ft-lbs. (122-129 N-m)
Wheel Hub Slotted Nut	minimum 100 ft-lbs. (136 N-m)

3.ASSEMBLY INSTRUCTIONS

3.1Uncrate Unit: Remove upper handle assembly, fuel tank, and linkages from the top of the crate.

- 12 -