Clock Management Panel
The unit that is designated as the controller generates the system clock. All units in the
system receive their time stamps from the system controller.
The clock for all VNC 325 units can be changed to reflect the local time as follows:
1. Entering the local time in the New Time field in the format yyyy-mm-dd hh:mm:ss
(see a figure 48).
1
2
Figure 48. Clock Management Panel
2. Click the Change Time button (b).
Controller Licensing Panel
The fields on this panel are set when the unit is manufactured and users should not attempt
modify them in any way.
CAUTION: If you do modify these fields, the unit may become unstable.
VN-Matrix 325 Serial Digital Over IP CODEC • Operation 58