4.Select Install the software automatically (Recommended) and click Next.
NOTE: You do not need to insert an installation disc.
The PC locates the driver needed and installs it in the correct location on the hard drive.
5.When the Completed screen appears, click Finish to close the wizard.
NOTE: The wizard appears only on the first occasion you connect the DP DA2 to that USB port. The wizard will reappear if you connect the DP DA2 to a different USB port or if you connect a different piece of equipment, requiring a different driver, to the same USB port.
6.Configure the DP DA2 as required.
Signal and HDCP LEDs
Signal LEDs | INPUT OUTPUTS | ||
SIGNAL |
|
| |
| |||
Input Signal LED — Lights green when main link activity is | 1 2 | ||
detected from the source device connected to the input. | HDCP |
|
|
|
|
| |
Output Signal LED — Lights green when a main link signal
is being transmitted to at least one of the display devices connected to the outputs.
HDCP LEDs
Input HDCP LED — Lights green when the source is HDCP encrypted and authenticated by the DP DA2.
Output HDCP LED — Lights green when the connected display device is HDCP compliant.
NOTE: The HDCP LEDs will not light if the source device does not require HDCP encryption or if the display devices are not HDCP compliant.
DP DA2 • Panel Features | 11 |
