Updating
Firmware
Updates to the DP DA2 firmware are released periodically on the Extron website. You can find the version that is currently loaded on your DA using SIS commands. Compare your firmware version with the latest release on the Extron website and decide whether to update your firmware.
TIP: Read the release notes provided on the website with the latest firmware to determine whether you need the latest version.
This chapter describes how to update firmware for the DP DA2:
•Downloading and Installing Firmware Loader
•Downloading DP DA2 Firmware
•Loading the Firmware to the DP DA2
•Resetting Firmware to the Factory Default Version
Downloading and Installing Firmware Loader
Extron recommends using the Firmware Loader software to update the firmware on Extron products. If you do not already have Firmware Loader installed on your computer, download it as follows:
1.Go to the Extron website at www.extron.com and click the Download tab.
2.On the Download Center screen, click the Software link on the left sidebar menu.
3.On the next Download Center screen, locate Firmware Loader and click its Download link.
Figure 8. Firmware Loader Download Link
4.On the next screen, enter the requested information, then click the Download fw_ loader_vnxnxn.exe button (where n is the Firmware Loader version number).
5.Follow the instructions on the rest of the download screens to save the executable Firmware Loader installer file to your computer. Note the folder in which the file was saved.
6.Use a file browser to locate the downloaded executable installer file and
7.Follow the instructions on the Installation Wizard screens to install Firmware Loader on your computer. Unless you specify otherwise, the installer program places the Firmware Loader file, FWLoader.exe, at C:\Program Files\Extron\FWLoader.
DP DA2 • Updating Firmware | 16 |
