Mini USB port — Connect a male USB mini-B cable to this port for SIS configuration and firmware updates.
HDMI input connector — Connect an HDMI cable between this port and the HDMI output port of the digital video source.
B
C
D IR output connector — Connect an IR device to this 2-pole, 3.5 mm captive screw pass-through connector for IR control (see RS-232 and IR Connector Wiring on page 14 to properly wire the IR connector).
NOTE: The extenders do NOT embed analog audio onto the HDMI signal. This analog audio signal is transmitted simultaneously with audio embedded within the HDMI signal.
DTP T HWP 232 and 332 D Connections
Front Panel
A
B D
AUDIO IN
HDMI IN
IR OUT
S |
G |
Extron
AUTO SW
HDCP | AUDIO IN |
1 |
|
2HDMI IN
CONFIG
A
B C
Figure 4. DTP T HWP 232 and 332 D Front Panel Connectors
AAudio input connector — Connect an unbalanced stereo audio source to this 3.5 mm mini stereo jack. Figure 5 shows how to wire the audio plug.
Tip
Left (+)
Ring
Right
Sleeve (
)
Figure 5. Audio Input Connector Wiring
DTP T HWP/UWP 232/332 D Transmitters • Installation and Operation | 8 |
