Extron electronic DTP T UWP 232/332 D, DTP T HWP 232/332 D manual SigX@X@*X@

Command and Response Table for SIS Commands

Command Function	SIS Command	Response	Additional Description
	(Host to Unit)	(Unit to Host)
Select and view input
Select an input	X!!	InX!•All]	Select input X! to transmit to the
			connected receiver.
Example:	1!	In01•All]	Select input 1.
View input selection	!	X!]	Input X! is selected.
Signal status
Request all signal status	EOLS}	SigX@•X@*X@]	0 = not detected
			1 = detected
			(Example: Input 1 • Input 2 * Output
HDCP status
View the HDCP status of a specific	EIX!HDCP}	HdcpIX%]	X! = input 1-2; X% = HDCP status
input			(HDMI inputs only)
View the HDCP status of both HDMI	EIHDCP}	HdcpIX%•X%]
inputs
View the output HDCP status	EOHDCP}	X^]
Auto switch status
View the auto switch status	EAUSW}	X#]	0 = disabled (default)
			1 = enabled (highest active input priority)
HDCP Authorized device
Set HDCP authorization per input	EEX!*X@HDCP}	HdcpEX!*X@]	X! = input (1 or 2)
			X@ = 0 (disabled) or 1 (enabled, default)
Set HDCP authorization to all inputs	EEX@HDCP}	HdcpEX@]	HDMI inputs only
View input HDCP authorization status	EEHDCP}	X@•X@]

Input video format (VGA input only, UWP models only)

Set input video format	2*X1)\	Typ2*X1)]
View current format	2\	X1)]
View auto-detected format	2*\	X1)]

X1) = 0 (HDMI, default) or 1 = force VGA inputs to DVI output

View current format of input 2.

View auto-detected format of input (X1) =1).

Force VGA DVI out (UWP models only)

Force VGA to DVI output	EX1(VTPO}	VtpoX1(]	X1(:= 0 (HDMI, default) or 1 (force VGA
			inputs to be DVI output)
View VGA to DVI output	EVTPO}	X1(]	View VGA DVI out status.

DTP T HWP/UWP 232/332 D Transmitters • Remote Control 20