Extron electronic DVI 104 Tx/Rx manual Rear panel features, Top panel features, Signal

DVI 104 Tx/Rx, cont’d

Rear panel features

		1	3	6	8
	3				Male Connector
	9	17 19		22	24
C	A single-link DVI-D male connector is used to connect the
	transmitter to the source and the receiver to the output device.
Pin	Signal		Pin		Signal	Pin	Signal
1	TMDS Data 2-		9		TMDS data 1-	17	TMDS data 0-
2	TMDS Data 2+		10		TMDS data 1+	18	TMDS data 0+
3	TMDS Data 2		11		TMDS data	19	TMDS data
	shield				shield		shield
6	DDC clock		14		+5 V power	22	TMDS clock
							shield
7	DDC data		15		Ground (+5V)	23	TMDS clock+
8	CEC control		16		Hot plug	24	TMDD clock -
					detect

Top panel features

45

6

D	LED — Both the transmitter and receiver have an LED that
	lights blue when the unit is receiving power. The LED on the
	transmitter also functions as a status indicator for the EDID
	minder feature.
E	Thumbscrews — When the male DVI-D connector from the
	transmitter or receiver is plugged into the female connector on
	the source or display, the connection can be held securely by
	tightening the thumbscrews.

4DVI 104 Tx/Rx • User’s Guide