Operation and Setup, cont’d

If you are unable to configure the MLS via the Windows®-based software

1. Check the MediaLink Control Software to determine its version number. The software version number appears in the top bar of the program’s window:

These MLS 304 Series and MLS 406 Series switchers can be set up using software version 2.1 or higher. Earlier versions are not designed to work with these models.

2.Verify that the connector at the RS‑232/MLC/IR port is correctly wired and that the PC’s correct COM port is selected when you start the software.

PRELIMINARY

3-10 MLS 304 Series, MLS 406 Series • Operation and Setup

Page 34
Image 34
Extron electronic MLS 406MA, MLS 304SA, MLS 304MA, MLS 406SA manual Preliminary