Extron electronic MLS 304MA, MLS 304SA, MLS 406 Mounting the Switcher, Tabletop use, Rack mounting

Mounting the Switcher

Tabletop use

Each MLS switcher comes with rack mounting brackets and rubber feet. For table­ top use, attach a self-adhesive rubber foot to each corner of the bottom of the unit.

Rack mounting

For rack mounting, do not install the rubber feet. Attach the provided rack mounting brackets to the switcher with machine screws, then fasten the switcher to the rack using the supplied machine screws.

Although it is not required, for the models with audio amplification (MLS 304MA, MLS 304SA, MLS 406MA, MLS 406SA) Extron recommends allowing one rack unit of space (1.75"/4.5 cm) above and below the switcher for air circulation to prevent overheating.

CThe MA and SA models contain a class AB amplifier, which gets hot. There is no cooling fan in the MLS switcher.

	304MAer
MLS k S		witch
Media	Lin

	NTRO	L
CO		PEAK
		CLIP	L
		SIGNA

	T SE	LECT
INPU		4

3

2

1

PRELIMINARY

Rack mounting the MediaLink Switcher

MLS 304 Series, MLS 406 Series • Installation 2-