Extron electronic MLS 304SA, MLS 304MA, MLS 406SA, MLS 406MA manual Remote Control, Mode

PRELIMINARY

Operation and Setup, cont’d

Monitor Output Modes
MLS 304MA, MLS 304SA
Mode	Selected input	Input special conditions	Monitor Output
Standard	Any composite video input	n.a.	None
	Any RGB input	n.a.	Selected input
DA	Any input	3 and 4 = RGB	Input 4
	Any input	3 or 4 = composite video	None
RGB follow	1 or 2	3 and 4 = RGB	Input 4
	3 or 4 = RGB	3 and 4 = RGB	Selected input
	3 or 4 = composite video	3 or 4 = composite video	None
MLS 406, MLS 406MA, MLS 406SA
Mode	Selected input	Input special conditions	Monitor Output
Standard	Any S-video or composite video	n.a.	None
	4, 5, or 6 = RGB	4, 5, and 6 = RGB	Selected input
DA	Any	4, 5, and 6 = RGB	Input 6
	Any	4, 5, or 6 = S-video
		or composite video	None
RGB follow	1, 2, or 3	4, 5, and 6 = RGB	Input 6
	4, 5, or 6 = RGB	4, 5, and 6 = RGB	Selected input
	4, 5, or 6 = S-video	4, 5, or 6 = S-video
	or composite video	or composite video	None

n.a. = not applicable

Remote Control

The MediaLink Switcher can be controlled by using its front panel controls; an optional Extron infrared remote control (the MLA-Remote, for example) and an Extron IR Link signal repeater; a MediaLink Controller; or another RS-232 control device or computer. See Control Connection on page 2-7 for wiring diagrams and system examples.

RS-232

MLC/IR

Tx Rx IR 12V

A B C

MediaLink Switcher Rear Panel

MLA-Remote

SIGNAL

IR Link

NAny Extron IR remote control that offers input selection buttons 1 through 6 can be used with the MLS switcher for input switching. Unlike most other models, the MLA-Remote also allows volume control and audio mute.

3- MLS 304 Series, MLS 406 Series • Operation and Setup