Nominal level

1 Vp-p for Y of S-video, and for composite video

 

0.7 Vp-p for RGB

 

0.3 Vp-p for C of S-video (MLS 406 Series)

Minimum/maximum levels

 

RGB

Analog: 0.3 V to 1.5 Vp-p (follows input)

Composite video

Analog: 0.4 V to 2.0 Vp-p (follows input)

Impedance

75 ohms

Return loss

<-40 dB @ 5 MHz

DC offset

±5 mV with input at 0 offset

Switching type

Triple-Action (RGB delay)

Sync

Input type

RGBHV, RGBS, RGsB, RsGsBs

Output type

RGBHV, RGBS, RGsB, RsGsBs (follows input)

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Input level

2.0 V to 5.0 Vp-p

Output level

TTL: 5.0 Vp-p, unterminated

Input impedance

10k ohms

Output impedance

75 ohms

Max input voltage

5.0 Vp-p

Max. propagation delay

30 ns

Max. rise/fall time

4.0 ns

Polarity

Positive or negative (follows input)

Audio

Gain

Unbalanced output: 0dB; balanced output: +6dB

Frequency response at 1 watt output

Preamp/Lineout

20 Hz to 20 kHz, ±0.5 dB

Direct (4/8 ohm)

20 Hz to 20 kHz, ±1.0 dB

Transformer (70V mono amplifier)

 

50 Hz to 20 kHz, +0 dB/-3 dB

Transformer (100V mono amplifier)

 

50 Hz to 20 kHz, +0 dB/-3 dB

THD + Noise

 

Power amp (mono or stereo)

 

0.037% @ 1 kHz at nominal level (1 watt, 8 ohm load)

Preamp

0.11% @ 1 kHz at nominal level

Lineout

0.018% @ 1 kHz at nominal level

S/N at maximum power output (unweighted)

Power amp

>75 dB @ 10 Hz to 22 kHz

Preamp

>80 dB @ 10 Hz to 22 kHz

Lineout

>80 dB @ 10 Hz to 22 kHz

Crosstalk

 

Power amp

<-75 dB @ 1 kHz, fully loaded

Preamp

<-75 dB @ 1 kHz, fully loaded

Lineout

<-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

CMRR

>85 dB @ 20 Hz to 200 Hz, >75 dB @ 20 Hz to 20 kHz

Bass

±10 dB @ 100 Hz

Treble

±10 dB @ 10 kHz

Loudness (contour)

+6 dB @ 100 Hz to 10 kHz

MLS 304 Series, MLS 406 Series • Reference Material A-

PRELIMINARY

Page 51
Image 51
Extron electronic MLS 304MA, MLS 304SA, MLS 406SA manual Sync, Audio, MLS 304 Series, MLS 406 Series Reference Material A-