Extron electronic MLS 304SA, MLS 304MA manual Firmware version, part number & information requests

PRELIMINARY

Serial Communication, cont’d

Command/response table for SIS commands (continued)

Command

ASCII Command

Response

Additional description

(host to switcher)

(switcher to host)

View the executive mode status.

X

Exe X1@ ]

Show executive mode status.

Example:

X

Exe0 ]

Executive mode is off.

Firmware version, part number & information requests

Query firmware version number.

Q

Ver X1! ]

Show the switcher’s firmware

version.

Request the part number.

N

N60-5X0-0X ]

Show the MLS’s part # –

MLS 304MA: 60-550-01

MLS 304SA: 60-550-02

MLS 406: 60-560-01

MLS 406MA: 60-560-02

MLS 406SA: 60-560-03.

Request general info.

I

(see below)

Show the MLS’s status.

Vid

• Aud

• Vol

X1

X1

X10

Video input #

X1

is selected/active.

Audio input

Audio volume

#

X1

is

status.

selected/active.

Upload firmware

NThe MLS must already have firmware version 2.1 or greater in order for these commands to be used. For a switcher with firmware version 2.0 or earlier, use the firmware uploader utility software instead. See Updating firmware page 4‑12.

Upload	E Upload ]	Go ]	The MLS will start uploading
			firmware code into its memory.
		Upl ]	The firmware was successfully
			loaded into the MLS.
View the upload status	Q	Ver X1! ]	Show the switcher’s firmware
			version. This is the same as
			the “query firmware version”
			command.
		?.?? ]	This is the response to the
			firmware version query if
			firmware uploading failed.

Reset to default settings (Zap)

Reset all MLS settings/memories . E zXXX	ZapXXX ]	Reset all settings and
		adjustments to the factory
		default.

4- MLS 304 Series, MLS 406Series • Serial Communication