3- | Command/response table for SIS commands (continued) | |||
12 |
|
|
|
|
| Command | ASCII Command Response | Additional description | |
MTP |
| (host to unit) | (unit to host) |
|
| Switch mode |
|
|
|
SW6 • | Set normal (manual) | 1# | F1] | The user selects inputs manually, from the front panel or |
switch mode |
|
| under remote control. | |
Set auto switch mode | 2# | F2] | The switcher automatically switches to the highest | |
Remote |
|
|
| numbered input with signals present. Manual switching |
|
|
| is disabled. | |
|
|
|
| |
| Lock (executive) modes |
|
| |
Control | Lock front panel | 1X | Exe1] | Enable Lock mode 1. |
functions |
|
|
| |
|
|
|
| |
| Unlock front panel | 0X | Exe0] | Enable Lock mode 0. |
| functions |
|
|
|
| View lock status | X | X1#] |
|
|
|
|
| |
| N X1#= Front panel lock | 0 = off (unlocked) |
| |
|
|
| 1 = on (locked) |
|
Command/response table for SIS commands (continued)
Command | ASCII Command | Response | Additional description |
| (host to unit) | (unit to host) |
|
Resets |
|
|
|
Reset all level and | EZT} | Zpt] | Clear all level and peaking adjustments to their default |
peaking adjustments |
|
| (0) values. |
Reset all skew | EZK} | Zpk] | Clear all input and output skew values to 0 ns. |
adjustments |
|
|
|
Reset audio input levels | EZA} | Zpa] | Reset all audio input levels (gain and attenuation) to 0 dB. |
Reset audio output level | EZV} | Zpv] | Reset the audio output levels (volume) to 100% (no |
|
|
| attenuation). |
Reset whole switcher | EZXXX} | Zpx] | Clear all ties and presets, reset all audio gains to 0 dB, |
|
|
| and reset volume to 100%. |
MTP SW6 • Remote Control
