Extron electronic MTP SW6 user manual Command/response table for SIS commands, Input selection

3-	Command/response table for SIS commands
6
	Command	ASCII Command		Response	Additional description
MTP		(host to unit)		(unit to host)
	Input selection
SW6	N The switcher supports 1-, 2-, and 3-digit numeric entries (1!, 02&, or 003%). The switcher reports all selections with 1-digit numbers.
	N The & select and the % select commands for video can be used interchangeably.
•
	Select input X!to	X!!		AllX!]	Select input X!video and audio to be the output.
Remote
	output, video and audio
	Example:	1!		All1]	Select input 1 video and audio.
Control	Select input X!to	X!&		VidX!]	Select X!video (audio breakaway).
	(see 2nd Note, above):
	output, video only
	Example	5&		Vid5]	Select input 5 video.
	Select input X!to	X!%		VidX!]	Select X!video (audio breakaway).
	output, video only
	Tie input X!to output,	X!$		AudX!]	Select X!audio (audio breakaway).
	audio only
	Example:	2$		Aud2]	Select input 2 audio.
	N X!= Input number		1 – 6

Command/response table for SIS commands (continued)

	Command	ASCII Command		Response	Additional description
		(host to unit)		(unit to host)
	Level adjustment
	Set a level setting	EX!*X@ILVL}		IlvlX!*X@]	Set level setting to X@.
	Increment level	EX!+ILVL}		IlvlX!*X@]	Increase the level setting.
	adjustment
	Decrement level	EX!–ILVL}		IlvlX!*X@]	Decrease the level setting.
	adjustment
	Show level	EX!ILVL}		X@]
	Peaking adjustment
	Set a peaking setting	EX!*X#IPEK}		IpekX!*X#]	Set peaking setting to X#.
MTP	Increment peaking	EX!+IPEK}		IpekX!*X#]	Shift the image one pixel to the right.
	adjustment
SW6	Decrement peaking	EX!–IPEK}		IpekX!*X#]	Shift the image one pixel to the left.
	adjustment
	Show peaking	EX!IPEK}		X#]
•
Remote	X#= Input peaking range		0 – 65
	N X!= Input number		1 – 6
	X@= Input level range		00 – 255
Control
3-7

Remote Control, cont’d