About the P/2 DA2 WM/EC and P/2 DA2
WM/EC AAP
The P/2 DA2 WM/EC and P/2 DA2 WM/EC AAP are a one input, two output, high resolution VGA/XGA distribution amplifier with audio. With a video bandwidth of 300 MHz, this distribution amplifier is compatible with VGA, SVGA, VESA, XGA, and SXGA graphics cards, monitors, projectors, and LCD panels.
For audio, the P/2 DA2 WM/EC features a 3.5 mm female jack for input and a 3.5 mm captive screw connector for balanced or unbalanced output.
The P/2 DA2 WM is the wallmount version and the P/2 DA2 EC is the Euro Channel version. The P/2 DA2 WM AAP and the P/2 DA2 EC AAP are the same base products, but with AAP faceplates added. These plates are a convenient method of providing various connectors for most audio and video applications.
Features
Gain/peak control— Compensates for signal degradation caused by long cable lengths.
Stereo audio — Front panel audio input jack and a 3.5 mm captive screw output connector on the rear panel.
Buffered local monitor output —
connector
Computer video input —
Wall mountable (WM model) —
Euro Channel mountable (EC model) — This model mounts easily in the Euro Channel raceway
Optional Architectural Adapter Plates — The P/2 DA2 WM may be
P/2 DA2 WM/EC
Chapter2Two
Controls and Installation
Front and Rear Panels
Installing the P/2 DA2 WM/EC
P/2 DA2 WM/EC Introduction | DA2 WM/EC Introduction |