Cabling, Connecting audio output | Extron electronic P/2 DA 2 WM/EC

Controls and Installation, cont’d

Cabling

The P/2 DA2 WM cabling diagram below shows how to connect input and output devices to the distribution amplifier’s front panel. The P/2 DA2 EC model has identical connectors.

AUTO POWER

100%

UNITY

50%

GAIN/PEAKING

Figure 2-5 — P/2 DA2 WM cabling

1.Connect your display device to the 15-pin HD female video output VGA connector on the rear of the P/2 DA2 WM/EC. See figure 2-3.

2.For audio output, refer to the section “Connecting audio output” and connect the audio output cable to the 3.5 mm captive screw connector on the rear of the P/2 DA2 WM/EC.

3.Connect the power input cable to the rear power input connector of the P/2 DA2 WM/EC.

4.Connect the computer’s video cable to the 15-pin HD female Input cable on the distribution amplifier’s faceplate.

5.If a local monitor is being used, connect the monitor to the 15-pin HD female buffered local monitor output on the faceplate.

6.For audio input, connect the input device into the front faceplate’s 3.5 mm female audio jack.

Connecting audio output

Before connecting audio output, determine whether your audio system is unbalanced or balanced. Then, follow the instructions below to connect unbalanced audio, or the instructions for “Balanced audio” to connect balanced audio.

Wiring the audio incorrectly may damage the audio output circuits.

Unbalanced audio

To attach the P/2 DA2 WM/EC to an unbalanced audio system, do the following:

1.Attach the audio cable to an unbalanced speaker input connector (tip and sleeve).

Tip Sleeve

2.Attach the audio cable to the audio cable connector (Extron part number 10-319-10). Fasten the captive screws inside the audio cable connector as shown in figure 2-6.

Unbalanced Output

Tip

See Warning

Sleeve (s)

Tip

See Warning

Connect the sleeve(s) to ground (GND). Connecting the sleeve(s) to a negative (-) terminal will damage audio output circuits.

2-6

P/2 DA2 WM/EC Controls and Installation

2-7

APP, P/2 DA 2 WM/EC specifications

The Extron Electronics APP, P/2 DA 2 WM/EC is a high-performance, dual output distribution amplifier that is specifically designed for professional audio and video applications. Ideal for various environments such as classrooms, conference rooms, and control centers, this compact and robust device ensures optimal signal integrity and reliability.

One of the main features of the APP, P/2 DA 2 WM/EC is its ability to take a single audio or video input and distribute it to two identical outputs. This feature makes it an essential tool for applications requiring multiple displays or audio systems utilizing the same source. The device supports high-resolution video signals, ensuring that the quality of the output remains pristine, regardless of the distance it must travel.

The APP, P/2 DA 2 WM/EC utilizes cutting-edge technology to maintain signal fidelity. It employs advanced circuitry designed to minimize distortion and signal loss, enabling consistent performance across varying signal conditions. The built-in features include signal amplification, which boosts input signals for powerful distribution, while the low-noise design ensures minimal interference.

Another highlight of this distribution amplifier is its versatility. It supports multiple video formats, including Composite, S-Video, and Component, making it suitable for a wide range of AV equipment. This compatibility ensures that users can integrate the APP, P/2 DA 2 WM/EC seamlessly into their existing systems, regardless of the source components being used.

The unit also comes with enhanced control options. It features a comprehensive set of integration tools that simplify installation and operation, such as remote control capabilities and diagnostic indicators. This user-friendly design helps operators easily monitor signal performance and troubleshoot any potential issues without disrupting the workflow.

When it comes to installation, the APP, P/2 DA 2 WM/EC is engineered for flexibility. Its compact form factor allows for convenient mounting in varied environments, whether on a rack or wall-mounted, optimizing space usage.

In summary, the Extron APP, P/2 DA 2 WM/EC is an exceptionally reliable and versatile distribution amplifier that offers advanced features and technologies catering to professional audio-video environments. Its robust performance, signal preservation, and user-friendly design make it an essential component for any modern AV system.

Extron electronic P/2 DA 2 WM/EC, APP user manual Controls and Installation, cont’d, Cabling

Models: APP P/2 DA 2 WM/EC