Extron electronic P/2 DA 2 WM/EC Multi Type Connector Architectural Adapter Plates, Front, Rear

A-10 P/2 DA2 WM/EC Appendix

Multi Type Connector Architectural Adapter Plates

	Adapter plate description		Plate	Front	Rear	Part #	Gray	Black	White
			size	connector type	connector type
1	S-video female and 1 BNC female		1	4-pin mini DIN female and	4-pin mini DIN female	70-107	-01	-02	-03
				BNC female	and BNC female
1	S-video female and 3 RCA female		2	4-pin mini DIN female and	4-pin mini DIN female	70-107	-02	-12	-22
				RCA female	and RCA female
1	S-video female and 2 RCA female		1	4-pin mini DIN female and	4-pin mini DIN female	70-107	-03	-13	-23
				RCA female	and RCA female
	1 BNC female and 2 RCA female		1	BNC female and	BNC female and	70-108	-01	-11	-21
				RCA female	RCA female
		1 BNC female and	1	BNC female and	BNC female and	70-108	-02	-12	-22
	1	3.5mm mini stereo jack		3.5mm mini stereo jack	3 solder cups
		1 RCA female and	1	RCA female and	RCA female and	70-109	-01	-02	-03
	1	3.5mm mini stereo jack		3.5mm mini stereo jack	3 solder cups

Appendix, cont’d

P/2 DA2 WM/EC Appendix A-11

The dotted line indicates the recommended cut-out area (3.875” H x 3.80” W) for the installation surface.	The solid, outer line (4.50” H x 4.60” W) represents the outside edge of the wall mounting bracket.	the P/2 DA2 WM enclosure (2.562” H x 3.437” will be located against the rear of the P/2 DA2 WM front panel.	The light gray area represents where
		W)

installation surface (wall or furniture). This diagram is at actual size.	P/2 DA2 WM Mounting Template Use this template as a guide for cutting the hole in the
shown