Extron electronic PVS 300, PVS 200 manual Stage Five - Configure the System, Configure the system

Stage Five — Configure the System

Stage 5

Items needed to help complete this stage:

•Laptop (or PC) with a network connection

•GC 2 configuration program (download from www.extron.com)

•MLC 104 IP Plus User’s Manual

•Projector manufacturer’s user’s manual

•Device driver and/or driver package (download from www.extron.com)

1.Configure the system

a.Download and install Extron’s Global Configurator (GC2) configuration program (available at www.extron.com) on the laptop or PC

1a Load Global Configurator 2 software

b.Ensure the laptop (or PC), and the MLC 104 IP Plus are connected to the LAN.

NIf this is not possible, connect a 2.5 mm TRS configuration cable (part # 70-355-01) to the laptop (or PC) and to the front panel configuration port of the MLC 104 IP Plus.

c.Launch GC2. Click on Help, then Contents (or press F1).

1c Launch the Global Configurator 2 program

2-26 PoleVault Systems Installation • Installation — Stage 5