Extron electronic SW12 VGA ARS, SW8/12 VGA manual Mounting instructions, Rack mounting the switcher

Mounting instructions

Rack mounting requires the included MBD 149 1U, through-desk and rack mounting kit (part #70-077-03).

Rack mount an SW8/12 VGA Ars unit as follows:

1. If present, remove the four rubber feet from the bottom of the unit.

2. Use four supplied 8-32 x 5/16" long screws to secure a mounting bracket to each side of the unit (figure 2-1).

3. Use four supplied 10-32 x 3/4" long screws to secure the bracket to the rail.

Mounting

Screws

Rack Mount

Bracket

Mounting

BracketScrews

Screws

Figure 2-1 — Rack mounting the switcher

SW8/12 VGA Ars • Installation and Operation 2-3