VNS 104 Operation
This section describes the process for decoding content using the VNS 104
Multi‑Stream Decoder. Topics that are covered include:
•VNS 104 Multi‑Stream Software Decoder
•VNS 104 Display Format and Scaling Modes
•VNS 104 Device Name
•Multiple Controller Domains
VNS 104 Multi‑Stream Software Decoder
The VNS 104 Software Decoder provides viewing of up to four live PURE3 streams from VN‑Matrix Series encoders that are on the same network. You can also view up to four PURE3 recorded streams that are in active playback on the same network. Before you can view content from the encoders, you need to configure the software and connect to the VN‑Matrix Enterprise Controller that is controlling the other devices on the network (see VNS 104 Configuration on page 8).
If the VNS 104 is correctly configured during installation, it automatically connects to the Enterprise controller. The Enterprise controller configures the VNS 104 software to run in the same mode as it was in when last used.
Figure 15. VNS 104 Connected to Enterprise Controller (Splash Screens Only)
VNS 104 Multi‑Stream Decoder • Operation 13
