Device ID and Device Checksum
Configuration requires several inputs. Be certain that you have the following items:
From the VNS 104 Software Case | From the Enterprise Controller (EC) | ||
|
|
|
|
• | Device ID | • | EC IP address |
|
|
|
|
• | Device checksum | • | EC port (default: 5432) |
|
|
|
|
Enter the Device ID and Device checksum from the software case into the appropriate boxes in the VNS 104 Configuration dialog box (see figure 10).
NOTE: If either the Device ID or Device Checksum entry is incorrect, a red “X” is shown after the Device Checksum box (see figure 10). When both are correct, a green checkmark is shown (see figure 11).
Figure 10. Device ID or Device Checksum Incorrect
10808902
Figure 11. Device ID and Device Checksum Correct
VNS 104 Multi‑Stream Decoder • Configuration | 10 |
