Extron electronic VSW 2VGA A user manual Installation and Operation, cont’d

Installation and Operation, cont’d

2.Mount the VSW 2VGA A on one of the following rack shelves:

•RSF 123 rack shelf kit (part #60-190-20)

•RSB 123 rack shelf (part #60-604-20)

•RSU 126 6 inch deep universal rack shelf kit

(part #60-190-10)

•RSB 126 6 inch deep basic rack shelf (part #60-604-10)

•RSU 129 1U universal rack shelf kit (part #60-190-01)

•RSB 129 1U basic rack shelf (part #60-604-01)

On the standard rack shelf, the switcher mounts in one of four locations to the rear of the rack or in one of four locations to the front of the rack.

3.Attach the switcher to the rack shelf using two

4-40 x 3/16 inch machine screws. Insert the screws from the underside of the shelf and securely fasten them into diagonally opposite corners, as shown in figure 2-1.

VersaTools Rack Shelf

1/4 Rack Width Front

False Faceplate

Use 2 mounting holes on

opposite corners.

(2) 4-40 x 3/16" Screws

Figure 2-1 — Mounting the VSW 2VGA A on a rack shelf

NSince the switcher is 1.0 inch high, there will be a gap of 0.75 inch above the switcher.

2-4 VSW 2VGA A • Installation and Operation