Extron electronic user manual 9 - Removing the cover, 10 - VSW 2VGA A jumper locations

2. Remove the two screws on each side of the switcher (figure 2-9). Remove the four connector nuts on the front panel of the switcher. Lift the top cover off of the switcher.

1

INPUT

2

INPUT

A

2VGA

VSW

Remove (4) Screws

1 2 Remove (4)

Connector Nuts

Figure 2-9 — Removing the cover

	FRONT PANEL
JMP4	JMP3	JMP1

x
- yyyy
nn
881	yyyyyyyy
-
20
EXTRON	ER:
	-

JMP5 JMP6

Figure 2-10 — VSW 2VGA A jumper locations

3.	Set the jumpers for the switcher. See figure 2-11.
4.	Set the cover in place and resinstall the screws remove in
	step 2.

There are five jumpers, numbered JMP1, and JMP3 thru JMP6, that control daisy chaining on the VSW 2VGA A switcher (figure 2-10). Both data and power must be daisy chained from one switcher to another.

VSW 2VGA A • Installation and Operation 2-11