Extron electronic VSW 2VGA A user manual Operation, Input selection, Using the VSW I AAP

Installation and Operation, cont’d

Operation

Apply power and the input signals. The video and audio output connectors, including the Loop Thru Input 1 connector, should output signals.

Input selection

There are three ways to select between Input 1 and Input 2:

•Toggle the front panel input select switch up (Input 1) or down (Input 2).

•Use the rear panel contact closure capability.

•Press the Show Me button on the VSW I AAP to select the input on the connected VSW 2VGA A switcher.

Using the VSW I AAP

The VSW I AAP can be used on the inputs of a single switcher or on the inputs of multiple switchers in a daisy chain configuration.

Setting the VSW I AAP jumpers

A jumper on the VSW I AAP may need to be shifted from jumper J6 (the default position) to J5, depending on the application. See the following illustration and table.

J5 J6

Jumper installed	Switcher compatibility
J6	VSW 2VGA A (Input 1)
J5	VSW 2VGA A (Input 2)

Single switcher example

The following illustration is an example of a single switcher configuration.

2-14 VSW 2VGA A • Installation and Operation